Description
Base Material | Polycarbonate |
Size | The deck base is 7.5" square. The top of the spacer is 2" high. |
Max Pipe Clearance | Pipes supported one pipestand high will have a clearance of 2" over the roof, with each spacer increasing the clearance by an additional 2". |
Max Load Weight | Maximum load weight may not exceed 118 lbs. per pipestand, based on 3 psi to the roof membrane. |
Spacing | Manufacturer's recommended spacing is not to exceed 10 feet centers depending upon the load. Make certain each pipestand is properly elevated to even load weight at all pipestands. |
The 3-R Spacer is a vital component for enhancing the performance of your rooftop pipe supports. This pillow block pipestand spacer is specifically designed to elevate pipe support models 3-R-2 and 3-R-4, providing additional height and clearance for pipes above the roof.
Key Features
- Dimensions: The 3-R Spacer measures 7½ inches square.
- Height Increase: Each spacer adds 2 inches of height to your pipe supports.
- Stackable Design: You can stack up to three spacers for greater elevation.
- Rounded Edges: The gently rounded edges prevent damage to the roof surface.
- Drainage Ports: Four drainage ports help avoid water pooling within the spacer.
- Durable Material: Made from durable polycarbonate resin for long-lasting use.
- Compatibility: Works seamlessly with all types of decking and roofing membranes.
- Load Capacity: Supports a maximum load of 118 lbs for the 3-R-2 and 3-R-4 models.
Installation Instructions
- Positioning: Place the pillow block pipestand spacer directly under the 3-R-2 or 3-R-4 supports.
- Alignment: Ensure the stacking and alignment pins fit snugly into the corresponding holes.
- Secure the Pipestand: Set the pipestand on the spacer, ensuring stability.
Benefits
- Enhanced Clearance: Each spacer increases the pipe clearance, allowing for better airflow and maintenance access.
- Durability: The polycarbonate material is UV-resistant, ensuring longevity.
- Easy Maintenance: Regular inspections are simple due to the elevated design.
Overall, the 3-R Spacer is an essential accessory for your pipe support system. The pillow block pipestand spacer enhances the height and functionality of your rooftop supports, ensuring a reliable and efficient installation.
